Common Problems with Commercial Epoxy Floor and How to Fix Them
Commercial epoxy floor is a popular choice for businesses and other commercial properties, but it can sometimes be prone to problems. Here are some of the most common issues, and how to fix them.
1) Peeling and flaking
One of the most common problems with commercial epoxy floor is peeling and flaking. This can be caused by a number of factors, including poor preparation of the surface before the epoxy was applied, or incorrect mixing of the epoxy itself. If you see signs of peeling or flaking, it’s important to act quickly to fix the problem.
The first step is to remove any loose pieces of epoxy from the floor. Once you’ve done that, you’ll need to sand down the surface to rough it up and provide a good key for the new epoxy. After that, you can apply a new layer of epoxy, following the manufacturer’s instructions carefully.
2) Yellowing
Yellowing is another common problem with epoxy commercial flooring. It’s usually caused by ultraviolet light, which can break down the epoxy over time. If your floor is starting to yellow, you’ll need to reapply a fresh layer of epoxy. You can also try using a UV-resistant topcoat, which will help to protect the epoxy from further damage.
3) Cracks and chips
Cracks and chips are another common issue with commercial epoxy flooring. They can be caused by a number of factors, including poor installation, heavy traffic, or even just normal wear and tear. If you see cracks or chips in your floor, you’ll need to repair them as soon as possible.
The best way to do this is to fill the cracks and chips with a two-part epoxy filler. Once the filler has dried, you can sand it down and reapply a fresh layer of epoxy.
4) Staining
Staining is another common problem with commercial epoxy flooring. It can be caused by a number of factors, including dirt, grease, and even spilled liquids. If your floor is starting to stain, you’ll need to clean it as soon as possible.
The best way to do this is to use a mild detergent and warm water. Once you’ve cleaned the floor, you can reapply a fresh layer of epoxy.
5) Scratching
Scratching is another common issue with commercial epoxy flooring. It can be caused by a number of factors, including heavy traffic, pets, or even just normal wear and tear. If your floor is starting to scratch, you’ll need to refinish it as soon as possible.
The best way to do this is to sand down the floor and reapply a fresh layer of epoxy. You can also try using a clear topcoat, which will help to protect the epoxy from further damage.
Commercial epoxy flooring is a popular choice for businesses and other commercial properties, but it can sometimes be prone to problems. Here are some of the most common issues, and how to fix them. If you have any questions or concerns, be sure to talk to a professional flooring contractor. They will be able to assess your specific situation and recommend the best course of action.
https://www.google.com/maps?cid=14327931111237516839